HOW TO REMOVE CORROSION FROM STAINED GLASS

How to Remove Corrosion From Stained Glass

How to Remove Corrosion From Stained Glass

Blog Article

Corrosion on stained glass is usually known as white mold. It appears on the guide or solder traces, leaving the stained glass piece spotted and unattractive. The corrosion or white mold is routinely the results of flux residue that was not completely removed.

A person system utilised to remove the corrosion is to scrub the artwork glass piece with cleanser. This will likely get rid of the corrosion, but it may lead to scratches around the glass.

The best way I have discovered for eliminating the corrosion is to make use of baking soda. Baking soda is not really as abrasive as cleanser and will never scratch the glass.

You'll need a little scrub brush or quite good metal wool. 1st dampen the scrub brush or steel wool with h2o. Then liberally sprinkle baking soda above the piece. Utilizing the dampened scrub brush or metal wool, scrub the glass piece vertically, horizontally and in a round motion.

Once the many corrosion is scrubbed off, thoroughly rinse from the baking soda and dry the art glass piece. If your piece had a patina complete, you will have to re-patina the piece. This may count on the amount of corrosion had accumulation to the piece.

After the piece is totally dry, make use of a ending stained glass florida compound to safeguard and polish the art glass piece.

This method functions incredibly effectively, nevertheless it requires time, function and reapplying finishes. When you've got a stained glass piece with corrosion, you actually would not have a decision. For future reference, you may steer clear of corrosion from developing by effectively eradicating flux when setting up your future piece.

The widespread cause of corrosion is flux. Never ever leave flux on a bit for more than a few hrs. There are a variety of business flux removers that you can use. Be sure you follow makers' directions.

I have discovered CJ's to be a superb commercial flux remover. Adhering to brands' directions, I liberally spray CJ's on just one side with the glass piece. Using a comfortable scrub brush, I scrub the glass in a round movement, then, rinse the piece with drinking water. Then, next exactly the same technique, do the other aspect.

Using baking soda and dish soap is another for industrial flux removers. Initially, sprinkle the piece with baking soda, then apply a little degree of dish soap to your piece. Having a comfortable, damp scrub brush make use of a round motion to clean the piece. Rinse with h2o and after that do the opposite side.

Following the piece has actually been cleaned and rinsed with water, pat the piece dry by using a tender thoroughly clean fabric and let it air dry. When it is totally dry, patina may be utilized. The final stage is to use ending compound to both sides.

Tend not to hurry the cleaning and ending. A very good cleaning and ending will help you save you time, function and price afterwards.

Report this page